Product List

(Total 195 Products )
Product Size: 40× 40× 10mm
Frame Material: PBT Plastic
Impeller Material: PBT Plastic
Quality System Authentication: SGS, ISO9001, 3C
Number/CTN: 500PCS/CTN ...
Min. Order: 1,000 Pieces
1. Power Distribution Box applys to all kinds of civil architecture and industrial and mining enterprises
2. Material: Steel and stainless steel and as customer′s request
3. ...
Min. Order: 5 Pieces
1. The shell of Distribution Cabinent(ABX2000) adopts standard steel and plastic spraying.
2. Beautiful appearance for open mounted and concealed install.
3. Reasonable ...
Min. Order: 100 Pieces
Vertical axial exhaust fan for marine is used for exhaust in cabin room. It not only uesed for concey air to the cabin room, but also for extract air from the room. Conveyed air ...
Min. Order: 50 Pieces
1. Fixed Switchgear Device(XGN66-12) is metal closed box fixed structure
2. The cabinet is assembly type.
3. Adopted alien steel(FA38 TYPE), assembly by many fittings.
4. Inner ...
Min. Order: 1 Piece
1. Distribution Cabinent(ABX1000) is light opening, elegant appearance.
2. Can reserve expanded space to fill up the card compensation, not affecting the appearance.
3. Not ...
Min. Order: 100 Pieces
1. GCK Low Voltage Switchgear is suitable for power plant, substation, industrial enterprise, etc.
2. It takes a role of motor distribution, electromotor control in 50/60Hz, max ...
Min. Order: 1 Piece
1. GCS low voltage draw-out switchgear is suitable for power distribution system of power plants, oil and chemical industry, metallurgy industry, textile industry and high building ...
Min. Order: 1 Piece
1. Ribs Box(PGX1000) can be used in the leakage, overload short circuit protection.
2. The rated curent is 225A and below.
3. Applied for various construction occasions of ...
Min. Order: 100 Pieces
Product Size: 70× 70× 15mm
Frame Material: PBT Plastic
Impeller Material: PBT Plastic
Quality System Authentication: SGS, ISO9001, 3C
Number/CTN: 400PCS/CTN ...
Min. Order: 1,000 Pieces
Textured finish on surface, with bolt and nuts for earth link, with neutral & earth link bar fixed inside, Rated to 415V/250A, Maximum loading 24ways (or 8ways X 3 phases).
Min. Order: 10 Pieces
Brushless DC FAN, DC FAN. Cooling fan:
1. OEM
2. Quality control and prefential price
3. Size: 40*40*20
4. Voltage: 5/12/24

Detailed Product Description

DC brushless 24V ...
Min. Order: 100 Pieces
1. Reasonable structure.
2. Beautiful appearance.
3. Strong
4. Low noise, energy saving.
5. Apply to follow place: Arehouse, office building, basement, canteen.
Min. Order: 100 Pieces
Paint finish; Epoxy polyester Powder
Coating textured finish.
Protection degree: IP66
Materials: Enclosure & door: Sheet steel 1.2mm till 1.5mm
Mounting Plate; Sheet steel ...
Min. Order: 10 Pieces
Product Size: 172× 150× 50mm
Frame Material: Aluminum alloy
Impeller Material: PBT Plastic (7 blades)
Quality System Authentication: SGS, ISO9001, 3C
Number/CTN: ...
Min. Order: 1,000 Pieces
1. Matterial: Sheet steel
2. Paint finish: Both externally and internally
3. Protected with epoxy polyester coating
4. Textured finish RAL7032 or RAL7035
5. Mounting plate: ...
Min. Order: 10 Pieces
1. Prefabricated Transformer Substation is advanced technology, innovative surface design
2. High-level protection & safety
3. Reasonable structure, smart appearance
4. Various ...
Min. Order: 1 Set
1. Panel can be fully open in 180 degrees for more convenient installation and maintenance.
2. The applying of the new technology standardization meet requirements of device and ...
Min. Order: 100 Pieces
1. The bottom of JXF2000 distribution box adoptes 10mm gridding in for convenient and clean installing
2. Wire frame: There are two long line frame for making the board wire tie ...
Min. Order: 100 Pieces
1). Large air volume
2). Easy to install
3). High efficiency
4). Small area occupy
5). Use for much places and much function
Min. Order: 100 Pieces
Paint finish; Epoxy polyester Powder
Coating textured finish.
Protection degree: IP66
Materials: Enclosure & door: Sheet steel 1.2mm till 1.5mm
Mounting Plate; Sheet steel ...
Min. Order: 10 Pieces
This series is used for the environment with combustible gas of IIA\IIB type, and temperature category is T1-T4. It used in the workshop, warehouse, office and gas station of the ...
Min. Order: 100 Pieces
1. The cabinent of Distribution Cabinent(LGX2000) is gray, and there is the guide rail inside.
2. Ground zero terminal row and grounding screw
3. For the height of all module ...
Min. Order: 100 Pieces
1. JXF1000 Distribution Box is assembled by the models of component and quantity.
2. The material of the box can be made of cold rolled steel and stainless steel.
3. The ...
Min. Order: 100 Pieces
1. Full plastic Distribution box is suitable for distributing control of modern buildings such as large stories buildings, guesthouse, passenger transport station, commercial net ...
Min. Order: 100 Pieces
1. GGD series low voltage switchgear is applicable for power plant, distribution station, industry and mining enterprises and other related distribution system, which works with ...
Min. Order: 1 Piece
1. Telephone Junction Box(DHX) adopts international advanced wiring module, having the convenient wiring, reliable closed joint, excellent electrical properties for jointing indoor ...
Min. Order: 100 Pieces
Product Size: 60× 60× 10mm
Frame Material: PBT Plastic
Impeller Material: PBT Plastic
Quality System Authentication: SGS, ISO9001, 3C
Number/CTN: 400PCS/CTN ...
Min. Order: 1,000 Pieces

Last Login Date: Aug 22, 2017

Business Type: Manufacturer/Factory, Trading Company

Main Products: Electric Power Equipment, Hardware, Ventilation Equipment, Electric Accessories, Fans, Distribution Box